Signal Salute with Trunnions
ONLY $169.00  + $11.35
Shipping & Handling
Toughness, coupled with good ductility, and the ability to resist
stress at elevated temperatures.

IF YOU WANT SUPER EXPLOSIVE  THUNDEROUS VERY
DEEP  SOUNDING KA BOOMS THAN HERE SHE IS.

HOW ARE THE TRUNNIONS MADE? EACH SIDE OF
MORTAR IS FLAT MILLED THEN BLIND HOLED AND
TAPPED. HALF INCH THREADED BAR IS SCREWED IN.
THEN CUSTOM MADE BRONZE BUSHINGS ARE PRESS FIT
IN PLACE AND THEN A CUSTOM 0.750" DIAMETER, ID
THREADED TRUNNION IS SCREWED ON TO THE
EXTENDED THREADED ROD. THE TRUNNIONS ARE
PLACED WEIGHT WISE SO THAT THE MORTAR WILL JUST
STAY UPRIGHT WHEN FREE MOUNTED. THIS WAY WHEN
YOU MOUNT THE MORTAR ONLY SLIGHT TRUNNION CAP
PRESSURE IS NEEDED TO KEEP IT IN ANY POSITION.
OVERALL TRUNNION LENGTH FROM BODY IS 1-1/2". FREE
TRUNNION LENGTH AFTER BRONZE BUSHING IS 1-1/4"

NOTICE: BY REDUCING THE  BORE BY ONLY +-.060"
THOUSANDS AND USING ONLY ABOUT 400 GRAINS FFG, I
GET AND EXTRA 300 TO 400 FEET OF FLIGHT FOR A
TOTAL OF 3,350 FEET OF GOLF BALL DISTANCE WITH THE
MORTAR AT A 45 DEGREE ANGLE. (golf balls come in at
1.687" but need a bit of room for expansion and deformity, hence
my calculations for bore diameter)

http://www.youtube.com/watch?v=ZfPq-vvSo58   

PRETTY COOL!!!
ALL OF THE SPECKS ON THIS ARE SAME AS ABOVE
EXCEPT THERE ARE NO TRUNNIONS.
- 5" TALL
- 3-1/2" WIDE AT BASE
- 3" WIDE AT THE BUSINESS END
- BORE IS +-.060" UNDER 1-3/4" DIAMETER  
(PERFECT GOLF BALL ACCOMADATION)
- 4" DEEP WITH A TAPPERED POWDER
POCKET.
- FUSE HOLE IS 1/8"
- WEIGHT12 POUNDS.
*****  PROUDLY MADE IN THE USA *****
Signal Salute
without Trunnions
$139.00 + $11.35
Shipping & Handling
Accesorize your Cannon with this hand-crafted Carriage
- Size 10 1/2" x 8"
- Height 5"
- Carrying Handles

Only $115

Available in these finishes:
Walnut, Cherry, Clear Coat,
or Unfinished.  

Please specify in order notes

Black Powder Cannons, Signal Salute Cannons, and Coehorn Golf Ball Cannon  
The Ultimate Custom Cannon Site!