Signal Salute with Trunnions
ONLY $169.00  + $10.95
Shipping & Handling
toughness, coupled with good ductility, and the ability to resist stress at elevated temperatures.

IF YOU WANT SUPER EXPLOSIVE  THUNDEROUS VERY DEEP  SOUNDING KA BOOMS THAN HERE
SHE IS.

HOW ARE THE TRUNNIONS MADE? EACH SIDE OF MORTAR IS FLAT MILLED THEN BLIND HOLED
AND TAPPED. HALF INCH THREADED BAR IS SCREWED IN. THEN CUSTOM MADE BRONZE
BUSHINGS ARE PRESS FIT IN PLACE AND THEN A CUSTOM 0.750" DIAMETER, ID THREADED
TRUNNION IS SCREWED ON TO THE EXTENDED THREADED ROD. THE TRUNNIONS ARE PLACED
WEIGHT WISE SO THAT THE MORTAR WILL JUST STAY UPRIGHT WHEN FREE MOUNTED. THIS
WAY WHEN YOU MOUNT THE MORTAR ONLY SLIGHT TRUNNION CAP PRESSURE IS NEEDED TO
KEEP IT IN ANY POSITION. OVERALL TRUNNION LENGTH FROM BODY IS 1-1/2". FREE TRUNNION
LENGTH AFTER BRONZE BUSHING IS 1-1/4"

SHE IS 5 INCHS TALL. 3-1/2 INCHS WIDE AT BASE, TAPPERS TO  3" INCHS WIDE AT THE BUSINESS
END. THE BORE IS +-.060" UNDER 1-3/4 DIAMETER (PERFECT GOLF BALL ACCOMADATION) BY 4
INCHS DEEP WITH A TAPPERED POWDER POCKET. FUSE HOLE IS 1/8 INCH. WEIGHS ABOUT 12
POUNDS.

NOTICE: BY REDUCING THE  BORE BY ONLY +-.060" THOUSANDS AND USING ONLY ABOUT 400
GRAINS FFG, I GET AND EXTRA 300 TO 400 FEET OF FLIGHT FOR A TOTAL OF 3,350 FEET OF GOLF
BALL DISTANCE WITH THE MORTAR AT A 45 DEGREE ANGLE. (golf balls come in at 1.687" but need a
bit of room for expansion and deformity, hence my calculations for bore diameter)

PROUDLY MADE IN THE USA  

http://www.youtube.com/watch?v=ZfPq-vvSo58   PRETTY COOL!!!
ALL OF THE SPECKS ON THIS ARE SAME AS ABOVE
EXCEPT THERE ARE NO TRUNNIONS.





Signal Salute
without Trunnions
$139.00 + $10.95
Shipping & Handling
** BLACK POWDER CANNONS
** LOUD REPORT CANNONS

Black Powder Cannons, Signal Salute Cannons, and Coehorn Golf Ball Cannon
 The Ultimate Custom Cannon Site!